保定电动门厂-保定电动伸缩门,工业门,车牌识别收费系统

电动伸缩门操作器包括一个小齿轮和以电动门开和关循环的相反方向来转动或驱动这个小齿轮的一个能量源构件。还提供一个齿轮扇形部件，它以小齿轮旋转的相反方向旋转。廊坊双兴电动门业提醒您！电动伸缩门齿轮扇形部件可和小齿轮连接并能被小齿轮驱动，从而它以小齿轮旋转的开和关方向中的一个来旋转。提供一个的热保护装置帮助控制系统辫别是门行程开始时的高电 流还是行程结束时的高电流。在初始时间内，峰值时间是在几个毫秒范围内，在运动结束时，该时间是在几百毫秒的范围内，从而将引起能激发一个双金属开关的热 效应。廊坊双兴电动门业提醒您！电动门操作器不需要通过用两个推挤棒在相反的方向作用的机械力平衡就能传送比现有模式大得多的力，它有一个件可与小齿轮连接并能被小齿轮驱动，从而 它以小齿轮旋转的开和关之一的方向旋转一个轴构件有一个第一端和第二端。轴构件的第一端和齿轮扇形部件相接，轴构件的第二端可与底盘和车辆的壁部分连接。 操作系统显示该机构中不同构件的几个不同角度的视图。考虑到用电方面，当电动机被开动时，全部电压被接通。这将会造成在电动门开始运动之前产生一个高电 流。

The electric telescopic door operator includes a pinion and an energy source component that rotates or drives the pinion in the opposite direction of the opening and closing of the electric door. A gear sector component is also provided, which rotates in the opposite direction of the pinion rotation. Langfang double Xing electric door reminding you! The electric fan door gear sector component can be connected to the pinion and can be driven by the pinion, so that it rotates in one direction of the opening and closing of the pinion. A thermal protection device is provided to help control the braid of a high current at the beginning of the door stroke or the high current at the end of the stroke. In the initial time, the peak time is within a few milliseconds, and at the end of the motion, the time is in the range of hundreds of milliseconds, which will cause the thermal effect that can stimulate a bimetal switch. Langfang double Xing electric door reminding you! The electric door operator does not need to transfer the force that is much larger than the existing mode by using the mechanical balance of the two push rod in the opposite direction. It has one part to be connected to the small gear and can be driven by a small gear, so it revolves a shaft member in the direction of the opening and closing of the small gear and has a first end and a third end. The second end. The first end of the shaft member is connected with the gear sector component, and the second end of the shaft member can be connected with the chassis and the wall part of the vehicle. The operating system displays several views of different parts of the mechanism. Considering the power consumption, when the motor is actuated, all the voltages are connected. This will result in a high current before the start of the electric door.