保定电动门厂-保定电动伸缩门,工业门,车牌识别收费系统

自动门扇停止运行的解决方法

First, the automatic door stop operation solution

1、检查一下电源是否正确联通，是否松动，插好电源。

1, check whether the correct power supply Unicom, whether loose, plug in the power supply.

2、检查一下移动门扇是否有拖地现象，若有此现象，门在启动时很吃力，主控制器会误认为有障碍而运行保护作用，使门扇停止运行。

2, check whether the moving door leaf mopping phenomenon, if there is such a phenomenon, the door is difficult to start, the main controller will mistakenly think of obstacles and operation protection, so that the door leaves stop running.

3、检查一下门扇的吊具滑轮部分是不是从轨道脱落下来，若有此现象，机组也会走不动；一般发生了人（物件）与门扇撞击后，常会出现此故障。

3, check the door of the spreader pulley part is not from the track off, if there is this phenomenon, the unit will not move; generally occurred after the collision of people (objects) and door, often appear this fault.

4、请留意一下感应自动门是否安装了“安全光线“，因安全光线的受光器上有灰尘覆盖也会引起误动作，使自动门主控制误认为有物体在门扇中间，从而停止关门不动

4, please note that automatic door sensor is installed "safe" light, because of safety light by light is covered with ash will lead to malfunction, the automatic door control mistaken for objects in the door, closed to stop the real