| 电动门的保养措施 |
| 添加时间：2021/9/11 14:48:26 浏览次数： |
电动门的保养措施
对于电动门，由于是暴漏在空气中，因为很多外界因素会导致门表面会出现很多锈，这就大大影响了美观。为了预防这类现象的发生，就要求用户在使用的时候定期对电动门进行保养，具体怎么做呢？继续往下看。
For the electric door, because of the leakage in the air, because many
external factors can cause a lot of rust on the surface of the door, it
will greatly affect the aesthetics. In order to prevent this kind of
www.laoniangongyu56.com www.zaoxingji.com.cn www.shejimoju.com
www.ldgcasting.com www.hslcasting.com.cn www.bdhxnt.com phenomenon
happening, ask the user to undertake to electric door regularly to
undertake maintenance on the time of use, how to do exactly? Keep
looking. 一、清除电机及传动链条表面灰尘，并加润滑油； 1. Remove dust from motor and drive
chain surface and add lubricating oil;
二、检查控制箱内器件，紧固接线端子，清洁箱内及表面灰尘；检查电动门的各类五金配件，如发现有损坏现象时及时进行修理或更换； 2. Check
the device in the control box, tighten the wiring terminal, clean the
box and surface dust; Check all kinds of hardware fittings, such as
repair or replacement in time for damage. 三、检查电动门上下行程开关，开关滑轨加润滑油； 3.
Check the travel switch of the electric door, and the slide rail and
lubricant; 四、门四周的烟／温感检查门体功能，消防中央流水槽钢模具 不锈钢铸件 扭王字块模具 井盖钢模具 标志桩模具 调匝式消弧线圈 风冷控制柜 烤漆龙骨监控员在联动台上测试伸缩门功能； 4. The
smoke/temperature inspection of the door around the door will check the
function of the door, and the central monitor of fire control will test
the expansion door function on the link.
五、手动控制电动门体，检查运行情况，并调整上下行程开关位置，令门体开启或封闭处于适当的位置，测试过程谨防门体冲顶或冲底。 5.
Manually control the electric door body, check the operation condition,
and adjust the position of the upper and lower travel switch, so that
the door body can be opened or closed in an appropriate position, and
the test process is wary of the top or bottom of the door body |
| 上一页 伸缩门使用范围 |
| 下一页 停车场收费系统采用非接触式智能卡 |
Copyright © 技术支持：遨游网络