一、清除电机及传动链条表面灰尘，并加润滑油； 1. Remove dust from motor and drive chain surface and add lubricating oil; 　　二、检查控制箱内器件，紧固接线端子，清洁箱内及表面灰尘；检查电动门的各类五金配件，如发现有损坏现象时及时进行修理或更换； 2. Check the device in the control box, tighten the wiring terminal, clean the box and surface dust; Check all kinds of hardware fittings, such as repair or replacement in time for damage. 　　三、检查电动门上下行程开关，开关滑轨加润滑油； 3. Check the travel switch of the electric door, and the slide rail and lubricant; 　　四、门四周的烟／温感检查门体功能，消防中央监控员在联动台上测试伸缩门功能； 4. The smoke/temperature inspection of the door around the door will check the function of the door, and the central monitor of fire control will test the expansion door function on the link. 　　五、手动控制电动门体，检查运行情况，并调整上下行程开关位置，令门体开启或封闭处于适当的位置，测试过程谨防门体冲顶或冲底。 5. Manually control the electric door body, check the operation condition, and adjust the position of the upper and lower travel switch, so that the door body can be opened or closed in an appropriate position, and the test process is wary of the top or bottom of the door body.