产品中心
联系我们
公司名称：佑红智能科技有限公司
咨询热线：13313028229
新闻动态
电动门伸缩门的作用和特点
电动门伸缩门的作用和特点
The function and characteristics of the telescopic door of the electric door
1、智能红外线防爬装置：遇人爬门时,系统会马上报警,从而保障门内的安全。2、特种型材：在高硬度锌铝合金型材上加上不同几何形状筋骨能大大增强其强度，表面经特殊电泳处理，光泽无限，不易粘尘，不被污染气体腐蚀，决不生锈，保新期长
1, intelligent infrared anti climbing device: when people climb the
door, the system will immediately alarm, thereby ensuring the safety of
the door. 2. Special profiles: the strength of the high hardness zinc
aluminum alloy profiles with different shapes and bones can greatly
enhance their strength. The surface has been treated with special
electrophoretic treatment, the gloss is infinite, it is not easy to
stick to the dust, it is not corroded by the polluted gas, it will never
rust and the new period is long.
3、工程塑料：门体主要塑料件(如管材与管材间的连接，塑料件，门体活动部件等等)采用高质量工程塑料(如PC、PA)，韧性高，耐冲击,抗扭曲，耐磨，耐冻，耐晒，不易老化，使用寿命长，免受风雪雷电、日晒雨淋之苦。
3, engineering plastics: the main plastic parts of the door (such
as the connection between pipe and pipe, plastic parts, door body moving
parts and so on) use high quality engineering plastics (such as PC,
PA), high toughness, impact resistance, anti twist, wear resistance,
frost resistance, sun resistance, aging, long service life, free from
wind, snow, thunder, thunderstorm, sun and rain.
4、智能红外线探头防碰撞装置：门体在关闭过程中遇人或异物30-50cm可自动返回运行，从而保障车辆及行人的安全。标准结构:门排内空(即前后相临两大弯主管之间的距离，不含主管尺寸)采用伸缩门标准尺寸320mm(参照国外技术)，保证交叉管最固，并大大减少运行噪音。
4, intelligent infrared probe anti-collision device: the door body
in the process of closing the person or foreign object 30-50cm can
automatically return to operation, so as to ensure the safety of
vehicles and pedestrians. Standard structure: the inner space of the
door row (i.e., the distance between the front and rear sides of the two
large bending heads, without the size of the head) adopts the standard
size 320mm of the telescopic door (referring to foreign technology) to
ensure the most solid cross tube and greatly reduce the noise of the
operation.
5. The main frame profile of the unique craft is made of plastic
parts. The screw of the connecting position adopts the hidden design to
improve the appearance of the door. The connection between the section
and the plastic part adopts the process of punching, pressing and
drilling, so that the structure of the door is firm and no solder joints
are found. The latest cross connection design: the cross tube is made
of special process, and the super PA wear-resistant sleeve is used. The
close combination of the pipe with the round pipe not only makes the
gate structure more firm, but also ensures the smooth operatio